| LD-45 | LD-48 | ||
|---|---|---|---|
| Swing Over Bed | 44″ | 48″ | |
| Swing Over Cross Slide | 30″ | 34″ (Spindle Bore: 6″ to 12″) 35″ (Spindle Bore: 16″ to 21.5″) |
|
| Center Height | 23″ (Spindle Bore: 6″ to 12″) | 34″ (Spindle Bore: 25″ to 12″) 35″ (Spindle Bore: 26″ to 21.5″) |
|
| Distance Between Centers | 47″ (Opt. up to 322″) | ||
| Carriage Type | Dove Tail | ||
| Carriage Width | 37.4″ | ||
| Cross Slide Width | 15.7″ | ||
| Bed Width | 24″ | ||
| Machine Length | 270″ (Opt. up to 543″) | ||
| Bed Way | 3V Ways and 1 Flat Way | ||
| Controller | Fanuc 0i-TF | ||
| X-Axis Servo Motor | 4HP / 5.4 HP | ||
| Z-Axis Servo Motor | 5.4HP / 9.4HP | ||
| Spindle Motor | 30HP/35HP (Opt. 40HP/50HP) | ||
| Spindle Bore | 6″ (Opt. up to 21.5″) | ||
| Spindle Nose | A2-11 (Opt. up to A2-28) | ||
| Spindle Speed | 9-600 RPM (Opt. up to 5-220 RPM) | ||
| Spindle Center | MT#6 | ||
| Turret Mode | H4-350 V8-160 (Opt. H4-350 VDI, V12-160, V12-Live Tooling ODT-N-25) |
||
| Tool Size | 1.26″ | ||
| Quill Diameter | 6.5″ | ||
| Quill Stroke | 9.8″ | ||
| Tailstock Center | MT#6 | ||
| Body Movement | Motorized | ||
| Quill Movement | Motorized/Manual (Opt. Hydraulic) | ||
| X-Axis Rapid Traverse | 6000 mm/min | ||
| X-Axis Ballscrew Diameter | 40mm x P5 | ||
| X-Axis Feed Range | 0.1-3000 mm/min | ||
| X-Axis Stroke | 26″ | ||
| Z-Axis Rapid Traverse | 6000 mm/min | ||
| Z-Axis Ballscrew Diameter | 63 mm/min x P10 | ||
| Z-Axis Feed Range | 0.1-3000 mm/min | ||
| Z-Axis Stroke | 40″ (Opt. up to 315″) | ||
CNC Heavy Duty Boring Turning Centersken@kentusa.com2019-11-14T13:06:27-08:00